News

  • 0
  • 0

Global IN738 Powder market trend 2024-2029 High Purity 3D Printing Nickel-based Alloy IN738 Powder by Newsen-mcafee

The China Securities New Energy Vehicle index rose as much as 4.1 percent after a strong rally in lithium-ion shares on the Chinese stock market. Brokerages said lithium enterprises would usher in marginal expectations, and currently, it may be the best time to layout power/energy storage lithium batteries.

According to a securities research report, the price of lithium carbonate in the upstream resource end continues to hit a new high, which reflects the shortage of lithium mineral resources, and lithium has become one of the core elements of the development of the lithium electricity industry. In 2022, global demand for lithium carbonate continues to grow strongly, while the supply-side growth is relatively limited. And, because related mining enterprises experienced the last lithium down cycle, they would expand IN738 Powder are expected to rise.

About 3D Printing Nickel-based Alloy IN738 Powder:
Nickel-based Alloy IN738 is oxidation, low expansion, nickel-cobalt-ferrite, aluminum, chromium and niobium addition. The alloy has considerable interest in the aircraft gas turbine designers and material engineers for accommodating and gap control components, such as rings, housings, shields, and seals for compressors, turbines, and exhaust systems.
 
In-738 alloy is a vacuum smelting, vacuum casting, precipitated nickel-based alloy, has excellent high temperature and high-temperature corrosion resistance, better than many low chromium content high-strength high-temperature alloys. Its design provides an alloy for the gas turbine industry that has good creep strength up to 1800 * f and can withstand long exposure to engine-related high-temperature court environments. Alloy IN738 has superior and high temperature lasting Performance is comparable to the widely used alloys 713c, as well as substantially better vulcanization resistance.

The IN738 alloy is usually a vacuum fuse casting process of vacuum homogenization and other high strength, high-temperature nickel-based alloy processes. Typical gtingdom creates 200-400 * F metal overheating exceeded the liquid phase line temperature 1500, 1800 preheating temperature. The situation will vary depending on the size of the part and the shape of the door. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Nickel-based Alloy IN738 Powder in bulk.

3D printing Nickel-based superalloy IN738 powder

Composition(percentage by mass)
 

Ni

Cr

Co

Ti

Al

Mo

Ta

Bal

14.0-16.0

8.0-9.0

2.50-4.00

2.50-1-4.00

1.00-2.00

1.00-2.00


 

Ta

Nb

C

Fe

 Zr

B

O

1.00-2.00

0.50-1.50

<=0.15

<=0.10

<=0.10

<=0.15

<=0.01

 

category

Alloy grades and characteristics

Alloy number:

Nickel-based superalloy IN738 powder

Particle size:

15-45&mu;m, 15-53&mu;m, 53-120&mu;m, 53-150&mu;m

Morphology:

Spherical or nearly spherical

Appearance:

Grey

Package:

Aluminum bag, Vacuum packing

Application:

3D printing metal powder

Other applications:

powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.


How is 3D Printing Nickel-based Alloy IN738 Powder produced?
The specific step of the production method of the chromium nickel-iron alloy is to use a chrome ore and nickel ore with a mineral heat furnace melt reducing process and a method of smelting a smelting.
The smelting temperature is 1920-1980K. The elements in the two ore are melted at high temperatures. To promote the reduction speed.
Carbon reduction chromium oxide generates the start temperature of 1373K; the reaction temperature of the formation of CR7C3 is 1403 K; the start temperature of CR23C6 is 1448k; the reduction of the start temperature of the reduction to form chromium is 1523K.
The mechanism of iron-element reduction is known that the start temperature of the iron oxide reduction reaction is lower than the CR2O3 reduction reaction. Since chromium is a mug with each other, the reduction reaction is easier, and the chromium in the nickel mine is also reduced to chromium iron.

Application of 3D Printing Nickel-based Alloy IN738 Powder:
The In-738 alloy provides an excellent combination of high heat creep and corrosion resistance, better than high strength super gold with lower chromium content. Inconel 738 is a nickel-based alloy, vacuum casting and precipitated hardening, providing excellent mechanical properties of 1800 &deg; F (982 &deg; C).
In general, the cutting performance of the IN-738 alloy is comparable to other high temperatures and high-strength nickel-based allies. Processing and grinding of IN-738 alloy.

The IN-738 alloy is developed to improve the casting performance of large cross-sectional sizes.
Maximum use of IN-738 alloy is an engine component in an industrial gas turbine industry, these components need to withstand high temperatures and thermal stresses as well as corrosion and sulfidation. The alloy is mainly used for gas turbines and jet engine components such as leaves, blades, and integral wheels.

 

Storage Condition of Nickel-based Alloy IN738 Powder:
The damp reunion will affect In738 powder dispersion performance and using effects, therefore, nickel-based alloy IN738 powder should be sealed in vacuum packing and stored in cool and dry room, the nickel-based alloy IN738 powder can not be exposure to air. In addition, the IN738 powder should be avoided under stress.

Packing & Shipping of Nickel-based Alloy IN738 Powder:
We have many different kinds of packing which depend on the nickel-based alloy IN738 powder quantity.
Nickel-based alloy IN738 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Nickel-based alloy IN738 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

 


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com

 

In738 Powder Properties

Other Names Alloy IN-738, IN738, IN-738C, 738C, 738CL
CAS No. N/A
Compound Formula Ni Cr Al Fe Mo
Molecular Weight N/A
Appearance Gray to Black Powder
Melting Point 1230-1315
Boiling Point N/A
Density 8.11 g/cm3
Solubility in H2O N/A
Specific Heat 0.10 Btu/lb/&deg; F (70 &deg; F)
Poisson's Ratio N/A
Tensile Strength 159000 psi (70 &deg;F)
Thermal Conductivity 82 Btu/ft2/in/hr/&deg;F (400 &deg;F)
Thermal Expansion 6.45 x 10-6 (70-200 &deg;F)
Vickers Hardness N/A
Young's Modulus N/A
   
   

In738 Powder Health & Safety Information

Signal Word Danger
Hazard Statements H317-H351-H372
Hazard Codes Xn
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com

The development of the Russia-Ukraine conflict will continue to dominate the commodity prices such as the IN738 Powder in the future. If the conflict eases or cools, Russia and Ukraine go back to negotiate, commodity prices would fall. However, if the situation between Russia and Ukraine deteriorates further, or evolves into a full-scale war, the price of the IN738 Powder is predicted to see further improvement over the coming days.

Inquery us

Our Latest News

Global early strength agent market trend 2022-2030 What are Early Strength Agents? by Newsen-mcafee

Early strength agent is an admixture which accelerates the development of concrete early strength and has no significant effect on later strength.…

Global silicon carbide powder market trend 2022-2030 What can Silicon Carbide Devices Bring to New Energy Vehicles? by Newsen-mcafee

Recently, the EU proclaimed new sanctions on Russia, including coal, timber, rubber, cement, and fertilizer, as well as high-end seafood silicon carbide powder. What is Silicon Carbide SiC?Silicon carbide (SiC) is a hard compound containi…

Global graphene market trend 2025-2029 What is Graphene Used For and Why? by Newsen-mcafee

Graphene is an allotrope of carbon, consisting of a single layer of atoms arranged in a two-dimensional honeycomb lattice nanostructure.…