News

  • 0
  • 0

Introduction to Titanium Carbide TiC Powder

An Introduction Titanium Carbide TiC Powder

Titanium carbide also known as TiC is a very common transition metal carbide with NaCl-type cubic crystal structure, high melting point, high hardness as well as a high Young's Modulus, high physical stability, chemical resistance and corrosion resistance, and excellent thermal and electrical conductivity. Therefore, it offers many applications and great potential in cutting tools for aerospace, components for aerospace, wear-resistant coatings, foam ceramics and infrared radiation materials.

The applications for Titanium Carbide TiC Powder

1. Utilized to create various multiphase materials

Titanium carbide-based ceramics are extremely hard tool materials, TiC and TiN as well as WC, A12O along with other raw materials made of various multiphase ceramic materials These materials have a large melting point and hardness, and high and exceptional chemical stability. is the best material for cutting tools, wear-resistant and other parts, at the same time they exhibit excellent electrical conductivity is the material of choice for electrodes.

Cutting tools: Due to the percentage of TiC solid particle dispersion inside the matrix, composite cutting tools not only to further improve the hardness however, they also some extent, enhance the fracture toughness, higher than the raw tool's cutting. Cutting performance is a lot. A12o3-tic ceramics can serve as armoring materials. As a tool material, its hardness is superior to (C, N) and Ti(C, N) due to N. To create it for steel and other cutting materials the friction coefficient much lower. There are many advantages of cutting. By combining the advantages Ti and (C, N) to create multiphase ceramics, a highly effective tools material can also be prepared.

2. They are also used for coatings.

Diamond coating: This manufacturing technique used to make diamond tools is mostly the impregnation process using powder metallurgy method. Due to the high interfacial energy between diamond and more general metallic or alloy the surface of diamond is not penetrated by alloys or metals that have a low melting temperature and the bonding performance is insufficient. Recent years have seen many researchers have conducted lots in research that has helped improve the bond strength between diamond and the metal matrix. The active metal method is the most popular one, which is the addition of an amount of titanium to metal bond, vanadium, chromium, and other active metals. Using these tools for sintering in liquid phase that is active. It is high carbon compounds , which form elements, and the affinity for diamonds is enormous, and allows for the enhancement of the diamond's surface, so as to realize the metallurgical connection of diamond and metal bond. But, the strength of the interface is influenced by the quantity of active metal in the mix, as well as the temperature of sintering and duration as well as other variables. This requires that the binding agent dissolve to enhance the activity of the metal toward the interface, due to the fact that this method is not appropriate for hot pressing Sintering of diamonds and metal powder with a quick time solid phase.

3. Utilized to prepare foam ceramics

In the capacity of a filter, ceramics have the ability to remove impurities from all fluids Its filtration mechanism is Adsorption and agitation. The filter is dependent on the chemical durability of the material especially in the metallurgical industry that has a high melting point filter, so this type of material is able to be oxided in the majorityof cases, as well as to adjust to the filtering process of metal melt, which is the main goal that is thermal shock resistance. Titanium carbide foam clays have more strength, hardness, heat and electrical conductivity, and also have better resistance to heat and corrosion more than oxide-based foam ceramics.

4. Used in infrared radio ceramic materials

Titanium carbonide is a sort of intermetallic chemical compound, that usually displayed good chemical stability. having no change in valence, and the system is subject to high temperature reduction of the preparation of samples. Parts of the titanium ions exhibit a delay phenomenon to appear, intending to melt into the cordierite the structure. This is followed by a change in the structure. In comparison to a single component its radiation performance of the titanium carbide near 3tma level is obviously improved, which is beneficial for the use in the area of high temperatures.

Main Manufacturer of Titanium Carbide TiC Powder

We are a trusted global chemical material supplier & manufacturer with more than 12 years of experience in providing high-quality chemicals as well as Nanomaterials. They include silicon, nitride powder, graphite , zinc sulfide calcium Nitride, 3D printing powder and others.

If you're in the market for high-quality titanium carbide TiC TiC Powder contact us today. contact us to send us an inquiry. (brad@ihpa.net)

Inquiry us

  • tags

Our Latest News

Introduction of aquarium near me and market analysis in 2022

The aquarium is a place for aquatic life display and popular science education, as well as a place for aquatic life resource protection and scientific research. Aquariums can specialize in marine life, freshwater life, or both; there are public aquar…

The Global Silicon Metal Market introduction and aluminum can melter supplier

The Global Silicon Metal Market Generally, there are two different types of silicon metals. One is called the Chemical grade and the other is called the Metallurgical grade. These t…

Introduction to aluminum can melter Additives

Introduction to aluminum can melter Additives Whether you're…