Products

  • 0
  • 0

Global HPMC market trend 2024-2029 Influence of Viscosity and Fineness of Hydroxypropyl Methyl Cellulose on Mortar Properties by Newsen-mcafee

European Commission President Ursula von der Leyen recently called on India and other countries to support sanctions against Russia over the Ukraine incident. At The Raisina Dialogue forum, von der Leyen said, "We earnestly appeal to all members of the international community to support our efforts to achieve lasting peace."  

Von der Leyen says countries around the world that have been suffering from the virus for two years must now deal with higher food, energy, and fertilizer prices. What is happening in Ukraine will not only determine the future of Europe, but also have profound implications for the rest of the world.

Because of the Russia-Ukraine conflict, the prices of many other commodities like the HPMC are expected to continue to rise in the future.

Viscosity and fineness are important indicators that affect the performance of hydroxypropyl methylcellulose HPMC. Studies have shown that the water retention effect of HPMC increases with the increase of its viscosity, but after the viscosity exceeds 40000 MPa•s, the water retention increases limited with the increase of viscosity. The higher the viscosity, the larger the molecular weight of HPMC, and the corresponding decrease in solubility. It will not improve the water retention of mortar, but it will have a negative impact on strength and workability. Comprehensive consideration, it is more appropriate to use cellulose ether with a viscosity of 40000 MPa•s in the cement mortar.


As the HPMC particles gradually become finer, the water retention of the mortar is also improved to a certain extent. Fineness affects the solubility of HPMC. Coarse HPMC dissolves very slowly in water and should not be used in dry mix mortars. In dry-mix mortar, HPMC is dispersed between aggregates, fine fillers and cementitious materials such as cement, and only a fine enough powder can prevent it from caking when mixed with water. When HPMC is added with water to dissolve the agglomerates, it is difficult to re-disperse and dissolve. HPMC with coarse particle size is not only wasteful, but also reduces the local strength of the mortar. When such dry-mixed mortar is used in large-scale construction, the curing speed of the local mortar may be significantly reduced, which may cause uneven hydration of the cementitious material. of cracking. For mechanically constructed spray mortars, due to the shorter mixing time, the requirements for the fineness of HPMC are higher. Therefore, after comprehensive consideration, the particle size of cellulose ether used for cement mortar should be less than 80 μm.


It can be seen that HPMC is a high-efficiency water-retaining agent for dry-mixed mortar, which reduces the bleeding rate and stratification of the mortar, and improves the cohesion and sag resistance of the mortar. Although HPMC slightly reduces the flexural and compressive strength of mortar, it can significantly improve the tensile strength and bond strength of mortar. In addition, HPMC can effectively inhibit the formation of mortar plastic cracks and reduce the mortar plastic cracking index. The water retention of mortar increases with the increase of HPMC viscosity, and when the viscosity exceeds 40000MPa•s, the water retention does not increase significantly. The fineness of HPMC also has a certain influence on the water retention rate of the mortar. When the particles are finer, the water retention rate of the mortar increases. The particle size of HPMC usually used for cement mortar should be less than 80μm.


TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality HPMC, please feel free to contact us and send an inquiry.

[email protected]




New Delhi: India is seeking to increase its purchases of crude oil from Brazil, the country's oil minister said recently after meeting his Brazilian counterpart.  

India is the world's third-largest importer and consumer of crude oil. Brazil currently supplies only a fraction of India's crude oil imports.  

India's state-owned companies Bharat Petroleum Corp and Oil and Natural Gas Corp have invested in oil and gas exploration in Brazil.  

India, which imports about 84% of its crude oil needs, is reducing its import bill by increasing biofuel use, among other things.  

India's state-owned fuel retailers are increasing ethanol storage capacity by 51 percent and the country plans to double the biofuel blend in petrol to 20 percent by 2025.  

India and Brazil are currently cooperating on biofuels and ethanol.

The prices of many commodities like the HPMC are expected to increase in the future.

Inquery us

Our Latest Products

Global market trend 2023-2026 The trend of long-term depreciation of the us dollar also affects the steel cut to length line operator by Newsen-mcafee

Steel processing industry - Current status of the cut to length line operator Growth in the construction, automotive and consumer…

Global 316L powder market trend 2023-2028 High Purity 3D Printing Stainless Steel SS 316L Powder by Newsen-mcafee

Recently, covid 19 outbreak spreads in Shanghai, China. There are more than 25,000 new asymptomatic domestic infections every day. China is implementing a dynamic zero-out policy. A leading respiratory expert said the key to COVID-19 prevention and c…

Global In718 powder market trend 2025-2026 High Purity 3D Printing Nickel Alloy IN718 Powder by Newsen-mcafee

Brazil, the world's largest coffee bean producer, recently announced that it is facing the worst drought in 91 years, affecting local hydropower generation and agricultural In718 powder keeps going up. About 3D Printing Nickel Alloy IN718…