Concrete Admixtures

  • 0
  • 0

Influence of Viscosity and Fineness of Hydroxypropyl Methyl Cellulose on Mortar Properties

European Commission President Ursula von der Leyen recently called on India and other countries to support sanctions against Russia over the Ukraine incident. At The Raisina Dialogue forum, von der Leyen said, "We earnestly appeal to all members of the international community to support our efforts to achieve lasting peace."  

Von der Leyen says countries around the world that have been suffering from the virus for two years must now deal with higher food, energy, and fertilizer prices. What is happening in Ukraine will not only determine the future of Europe, but also have profound implications for the rest of the world.

Because of the Russia-Ukraine conflict, the prices of many other commodities like the HPMC are expected to continue to rise in the future.

Viscosity and fineness are important indicators that affect the performance of hydroxypropyl methylcellulose HPMC. Studies have shown that the water retention effect of HPMC increases with the increase of its viscosity, but after the viscosity exceeds 40000 MPa•s, the water retention increases limited with the increase of viscosity. The higher the viscosity, the larger the molecular weight of HPMC, and the corresponding decrease in solubility. It will not improve the water retention of mortar, but it will have a negative impact on strength and workability. Comprehensive consideration, it is more appropriate to use cellulose ether with a viscosity of 40000 MPa•s in the cement mortar.


As the HPMC particles gradually become finer, the water retention of the mortar is also improved to a certain extent. Fineness affects the solubility of HPMC. Coarse HPMC dissolves very slowly in water and should not be used in dry mix mortars. In dry-mix mortar, HPMC is dispersed between aggregates, fine fillers and cementitious materials such as cement, and only a fine enough powder can prevent it from caking when mixed with water. When HPMC is added with water to dissolve the agglomerates, it is difficult to re-disperse and dissolve. HPMC with coarse particle size is not only wasteful, but also reduces the local strength of the mortar. When such dry-mixed mortar is used in large-scale construction, the curing speed of the local mortar may be significantly reduced, which may cause uneven hydration of the cementitious material. of cracking. For mechanically constructed spray mortars, due to the shorter mixing time, the requirements for the fineness of HPMC are higher. Therefore, after comprehensive consideration, the particle size of cellulose ether used for cement mortar should be less than 80 μm.


It can be seen that HPMC is a high-efficiency water-retaining agent for dry-mixed mortar, which reduces the bleeding rate and stratification of the mortar, and improves the cohesion and sag resistance of the mortar. Although HPMC slightly reduces the flexural and compressive strength of mortar, it can significantly improve the tensile strength and bond strength of mortar. In addition, HPMC can effectively inhibit the formation of mortar plastic cracks and reduce the mortar plastic cracking index. The water retention of mortar increases with the increase of HPMC viscosity, and when the viscosity exceeds 40000MPa•s, the water retention does not increase significantly. The fineness of HPMC also has a certain influence on the water retention rate of the mortar. When the particles are finer, the water retention rate of the mortar increases. The particle size of HPMC usually used for cement mortar should be less than 80μm.


TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality HPMC, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com




New Delhi: India is seeking to increase its purchases of crude oil from Brazil, the country's oil minister said recently after meeting his Brazilian counterpart.  

India is the world's third-largest importer and consumer of crude oil. Brazil currently supplies only a fraction of India's crude oil imports.  

India's state-owned companies Bharat Petroleum Corp and Oil and Natural Gas Corp have invested in oil and gas exploration in Brazil.  

India, which imports about 84% of its crude oil needs, is reducing its import bill by increasing biofuel use, among other things.  

India's state-owned fuel retailers are increasing ethanol storage capacity by 51 percent and the country plans to double the biofuel blend in petrol to 20 percent by 2025.  

India and Brazil are currently cooperating on biofuels and ethanol.

The prices of many commodities like the HPMC are expected to increase in the future.

Inquiry us

Our Latest Concrete Admixtures

High Purity Tin Sn Powder CAS 7440-31-5,99%

Aluminium buyers in the US physical metal market have held off on new orders amid fears of a recession triggered by rising inflation and supply chain crises. Spot aluminium trading on the market has been suspended in recent weeks, according to indus…

CAS 1592-23-0 Calcium Stearate Powder

Prices in the national electricity market averaged $87 per megawatt-hour in the first three months of the year, above the level promised by the federal government. Wholesale electricity prices for industry and large businesses have already exceeded t…

What is Natural Graphite?

As the European Union tries to reduce its dependence on Russian energy, the Russian president recently said Russia would try to shift its energy exports to the east, adding that there was no way for European countries to give up Russian gas immediate…